SuzukiHayabusa.org

TECHNICAL => HELP! => Topic started by: 6 inch over on March 25, 2016, 07:22:36 PM

Title: Crank
Post by: 6 inch over on March 25, 2016, 07:22:36 PM

Looking to buy a crank . What's the turnaround on a new weld up?

Title: Re: Crank
Post by: 6 inch over on March 25, 2016, 08:03:03 PM

Gen 1 busa, 5 mil

Title: Re: Crank
Post by: knecum on March 25, 2016, 09:54:13 PM

If your wanting your own crank done, it would take 3 -4 months.   Or you can buy one from someone but then you wouldn't know the history of the crank your getting. Could've  had 4 spun bearings. I never use bad cranks for weld ups. I won't even build one if someone  brought it to me and told me it was from a damaged crank.  Do what you want though.

Title: Re: Crank
Post by: RansomT on March 25, 2016, 10:01:02 PM

APE has Billet ones with no core charge for $1949

Title: Re: Crank
Post by: 6 inch over on March 25, 2016, 10:27:41 PM

Thanks, I hope my spare is good

Title: Re: Crank
Post by: 6 inch over on March 26, 2016, 06:39:01 AM

Quote from: RansomT on March 25, 2016, 10:01:02 PM

APE has Billet ones with no core charge for $1949

I didn't know that. I guess I need to call them back
And ask more ????.

Title: Re: Crank
Post by: speedduck on March 27, 2016, 03:07:15 AM

That is a great deal, few years ago i paid much more for 5mm billet, and it was not as good as this one,

http://www.hayabusazone.com/crankshafts.html

Title: Re: Crank
Post by: 6 inch over on March 27, 2016, 04:53:10 PM

I'm calling tomorrow, I wish they would have 1 on the shelf.

Title: Re: Crank
Post by: Rocketgeezer on March 28, 2016, 07:03:02 AM

Have not done a bike motor with a good crank, but on my blown dragster motors if your running hard (and who don't) there is no substute for a billet crank, at any price