Author Topic: Mike-Nightrider - Turbo Hayabusa (Read 422751 times) Tweet

Mike-Nightrider · « **Reply #600 on:** April 11, 2011, 12:41:48 PM »

Quote from: Nem on April 11, 2011, 07:54:54 AM

did you add extra weight just for testing? looks like alot .....how much you usually run for racing?

Yes Nem. Ive added that much weight to go sure that the clutch wont slip.
At the race Ill use only 2 washers and the medium springs between the levers (in Lockup mode).

My best 60ft was a 1,36 last year. I must still learn a lot more about using that clutch

Nem · « **Reply #601 on:** April 11, 2011, 12:54:28 PM »

oh ok......how many grams on each arm

Mike-Nightrider · « **Reply #602 on:** April 12, 2011, 01:16:56 PM »

Quote from: Nem on April 11, 2011, 12:54:28 PM

oh ok......how many grams on each arm

14 grams on each arm.

Nem · « **Reply #603 on:** April 12, 2011, 01:24:13 PM »

pay attention to rpm drop when launching

Mike-Nightrider · « **Reply #604 on:** April 12, 2011, 01:39:59 PM »

Quote from: Nem on April 12, 2011, 01:24:13 PM

pay attention to rpm drop when launching

I understand

Nem · « **Reply #605 on:** April 12, 2011, 01:49:37 PM »

Mike-Nightrider · « **Reply #606 on:** April 12, 2011, 03:59:30 PM »

Mike-Nightrider · « **Reply #607 on:** April 12, 2011, 03:59:58 PM »

Mike-Nightrider · « **Reply #608 on:** April 12, 2011, 04:00:24 PM »

murderedout07 · « **Reply #609 on:** April 15, 2011, 12:58:01 AM »

How much are your forks cut?

Mike-Nightrider · « **Reply #610 on:** April 16, 2011, 10:51:18 AM »

Quote from: murderedout07 on April 15, 2011, 12:58:01 AM

How much are your forks cut?

The fork is near 2" shorter than stock.

Mike-Nightrider · « **Reply #611 on:** April 16, 2011, 10:57:52 AM »

Found a "before and after pic" of a fork from a friend we've shortened.

murderedout07 · « **Reply #612 on:** April 16, 2011, 06:55:36 PM »

Thank you. Gotta pull mine apart again to replace the seals...blew them out in 3 weeks.

Mike-Nightrider · « **Reply #613 on:** April 17, 2011, 03:50:48 AM »

Quote from: murderedout07 on April 16, 2011, 06:55:36 PM

Thank you. Gotta pull mine apart again to replace the seals...blew them out in 3 weeks.

Only 3 weeks? Damn, I dont like to work on the fork

BTW: I used that parts to lower the fork
http://secure.mycart.net/catalogs/catalog.asp?prodid=2704270&showprevnext=1

murderedout07 · « **Reply #614 on:** April 17, 2011, 03:57:34 AM »

Yup. New rear shock that wasn't set up, and added a 10psi spring. The bike was pulling massive power wheelies when hitting boost, so it blew out the fork seals from landing too hard. Oh well.

Mike-Nightrider · « **Reply #615 on:** April 18, 2011, 01:53:03 PM »

Quote from: murderedout07 on April 17, 2011, 03:57:34 AM

Yup. New rear shock that wasn't set up, and added a 10psi spring. The bike was pulling massive power wheelies when hitting boost, so it blew out the fork seals from landing too hard. Oh well.

We need a sticker: Too many high speed wheelies can cause fork damage

Mike-Nightrider · « **Reply #616 on:** April 18, 2011, 02:12:31 PM »

Ive got a few important parts on Saturday. Finally...

Mike-Nightrider · « **Reply #617 on:** April 18, 2011, 02:13:12 PM »

Turbo oil return.

murderedout07 · « **Reply #618 on:** April 18, 2011, 02:14:19 PM »

Quote from: Mike-Nightrider on April 18, 2011, 01:53:03 PM

Quote from: murderedout07 on April 17, 2011, 03:57:34 AM
Yup. New rear shock that wasn't set up, and added a 10psi spring. The bike was pulling massive power wheelies when hitting boost, so it blew out the fork seals from landing too hard. Oh well.

We need a sticker: Too many high speed wheelies can cause fork damage

Mike-Nightrider · « **Reply #619 on:** April 18, 2011, 02:15:29 PM »

One of my favorite parts. RCC case saver

Mike-Nightrider · « **Reply #620 on:** April 18, 2011, 02:16:03 PM »

Mike-Nightrider · « **Reply #621 on:** April 18, 2011, 02:16:38 PM »

Cookie · « **Reply #622 on:** April 18, 2011, 03:14:24 PM »

Hey, Mike! How have you been? What's with the wrap? Polished lip?

I like that case saver, too. Does it work with stock cover if someone wanted to use it that way?

Just saying.

murderedout07 · « **Reply #623 on:** April 18, 2011, 04:37:55 PM »

What are the injectors for? Bigger primaries?

TrickTom1 · « **Reply #624 on:** April 18, 2011, 06:51:41 PM »

Quote from: murderedout07 on April 18, 2011, 04:37:55 PM

What are the injectors for? Bigger primaries?

yes, looking good Mike

News:

Author Topic: Mike-Nightrider - Turbo Hayabusa (Read 422751 times) Tweet