Haybusa Parts and Service Member Support

Author Topic: hayabusa firing but wont run, will run on easystart  (Read 5118 times)

Offline willpegley11

  • New User!
  • *
  • Posts: 2
  • Enthusiast
hayabusa firing but wont run, will run on easystart
« on: July 07, 2018, 02:56:11 PM »
okay so i have a hayabusa engine in my fisher fury, its sat around for about 4 years, gave her fresh oil, new fuel lines, got rid of most of the stale fuel in there, it will fire and try to run but wont stay running, it will run on easy start if sprayed continusly. I put a set of new plugs in also, it is getting fuel to the injectors as have had them out and they are spraying but unsure if it is enough as it must be most certainly fuel starvation, ive had apart and cleaned the motorcycle fuel pump no problems there.
Could this be due to a sensor of some sort or a fault in the ecu?
any help would be great
will

Offline Thomas

  • Rider
  • ***
  • Posts: 151
  • Gender: Male
  • Enthusiast
Re: hayabusa firing but wont run, will run on easystart
« Reply #1 on: July 07, 2018, 07:09:33 PM »
Adjust TPS, check fuel pressure

Is it Gen1 or Gen2 engine?
We guarantee fast service no matter how long it takes.

Offline willpegley11

  • New User!
  • *
  • Posts: 2
  • Enthusiast
Re: hayabusa firing but wont run, will run on easystart
« Reply #2 on: July 08, 2018, 03:22:19 AM »
its gen 1 has the exterior fuel pump

Offline Gary Evans

  • Rider
  • ***
  • Posts: 157
    • AzBikeTech
Re: hayabusa firing but wont run, will run on easystart
« Reply #3 on: July 08, 2018, 02:39:12 PM »
Suggest having the injectors cleaned/flow tested and check fuel pressure at the rail.

Offline TT

  • OFF TOPIC
  • Post Master
  • **********
  • Posts: 1524
Re: hayabusa firing but wont run, will run on easystart
« Reply #4 on: August 10, 2018, 02:39:52 PM »
i believe that every bike should have a fuel pressure gage on it, turboed or not
alcohol is the cause and solution to all my problem,s

it burn,s when i pee

tattoos and harley,s  both image enhancers