Haybusa Parts and Service Member Support

Author Topic: Pin 21 question  (Read 18855 times)

Offline firemanjim

  • Post Whore
  • ****
  • Posts: 914
  • Gender: Male
    • Black Art Racing
Pin 21 question
« on: July 15, 2018, 10:51:12 PM »
Pin 21 question, does grounding this switch to the MS map?
Official Site Tuner

Home of one of the fastest 750cc bikes in the world
239MPH faired, 217MPH naked!
Bonneville 200 Club
El Mirage 200 Club
Mojave Mile 200 Club
Mojave Magnum 200 Club
NEDRA 100 MPH Club
Gairdner 200MPH Achiever 2013
2014 1st place Mojave Mile N/A bike
2015 top speed trophy at WOS
Colorado mile 200 MPH club
2017 DLRA 200 MPH club
2018 Shift Sector 200 MPH Club

Offline RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Pin 21 question
« Reply #1 on: July 16, 2018, 08:19:18 AM »
[IIRC] On the USA ECU, it comes grounded.  Cutting the wire connection switches maps. European ECU it's the opposite.


It's been awhile, I typically just get a quality harness from Boost by Smith.
Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350

Offline firemanjim

  • Post Whore
  • ****
  • Posts: 914
  • Gender: Male
    • Black Art Racing
Re: Pin 21 question
« Reply #2 on: July 18, 2018, 10:08:47 PM »
Found the pin and cut the wire, even tried grounding it. Looking at bike running with Editor is there no way to see if the MS map triggers??
Official Site Tuner

Home of one of the fastest 750cc bikes in the world
239MPH faired, 217MPH naked!
Bonneville 200 Club
El Mirage 200 Club
Mojave Mile 200 Club
Mojave Magnum 200 Club
NEDRA 100 MPH Club
Gairdner 200MPH Achiever 2013
2014 1st place Mojave Mile N/A bike
2015 top speed trophy at WOS
Colorado mile 200 MPH club
2017 DLRA 200 MPH club
2018 Shift Sector 200 MPH Club

Offline busa2001

  • Mad Post Whore
  • ******
  • Posts: 3137
Re: Pin 21 question
« Reply #3 on: July 19, 2018, 06:03:25 PM »
Found the pin and cut the wire, even tried grounding it. Looking at bike running with Editor is there no way to see if the MS map triggers??
You could simply add 10% fuel to the idle map MS map and try it at idle, that's what i did to verify the functionality..it works.

Offline firemanjim

  • Post Whore
  • ****
  • Posts: 914
  • Gender: Male
    • Black Art Racing
Re: Pin 21 question
« Reply #4 on: July 31, 2018, 07:11:35 PM »
Tried that, added 20 % or more down low and ran bike in gear on stand with no discernable change grounded and not-----
Already using the feature in Editor for my shift light---
Official Site Tuner

Home of one of the fastest 750cc bikes in the world
239MPH faired, 217MPH naked!
Bonneville 200 Club
El Mirage 200 Club
Mojave Mile 200 Club
Mojave Magnum 200 Club
NEDRA 100 MPH Club
Gairdner 200MPH Achiever 2013
2014 1st place Mojave Mile N/A bike
2015 top speed trophy at WOS
Colorado mile 200 MPH club
2017 DLRA 200 MPH club
2018 Shift Sector 200 MPH Club

Offline RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Pin 21 question
« Reply #5 on: July 31, 2018, 08:08:34 PM »
Tried that, added 20 % or more down low and ran bike in gear on stand with no discernable change grounded and not-----
Already using the feature in Editor for my shift light---


Which map and where did you add 20%?
Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350

Offline firemanjim

  • Post Whore
  • ****
  • Posts: 914
  • Gender: Male
    • Black Art Racing
Re: Pin 21 question
« Reply #6 on: July 31, 2018, 11:18:36 PM »
MS map and about 5-10 % throttle and 2800-4000 rpm
Official Site Tuner

Home of one of the fastest 750cc bikes in the world
239MPH faired, 217MPH naked!
Bonneville 200 Club
El Mirage 200 Club
Mojave Mile 200 Club
Mojave Magnum 200 Club
NEDRA 100 MPH Club
Gairdner 200MPH Achiever 2013
2014 1st place Mojave Mile N/A bike
2015 top speed trophy at WOS
Colorado mile 200 MPH club
2017 DLRA 200 MPH club
2018 Shift Sector 200 MPH Club

Offline RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Pin 21 question
« Reply #7 on: August 01, 2018, 08:35:05 AM »
Unless you changed it, everything below the 15.5 column is only effected by the IAP Map. So, even if you ground 21 it is just staying in the IAP Map.
Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350

Offline firemanjim

  • Post Whore
  • ****
  • Posts: 914
  • Gender: Male
    • Black Art Racing
Re: Pin 21 question
« Reply #8 on: August 01, 2018, 12:23:01 PM »
Makes sense, will look at the change point
Official Site Tuner

Home of one of the fastest 750cc bikes in the world
239MPH faired, 217MPH naked!
Bonneville 200 Club
El Mirage 200 Club
Mojave Mile 200 Club
Mojave Magnum 200 Club
NEDRA 100 MPH Club
Gairdner 200MPH Achiever 2013
2014 1st place Mojave Mile N/A bike
2015 top speed trophy at WOS
Colorado mile 200 MPH club
2017 DLRA 200 MPH club
2018 Shift Sector 200 MPH Club

Offline RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Pin 21 question
« Reply #9 on: September 08, 2018, 12:03:23 PM »
Just as a follow-up.


Had a nitrous bike come into the shop that had a bad PC ignition module, coils had be wired up wrong by another shop and burned up the module.  I decided to put in a relay that trigger off of the nitrous controller activation output.  When the signal is applied, the relay trips sending a ground to ECU pin 21. Works like a charm.  No ground, MS map.  Add a ground,  TPS map. 
Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350

Offline firemanjim

  • Post Whore
  • ****
  • Posts: 914
  • Gender: Male
    • Black Art Racing
Re: Pin 21 question
« Reply #10 on: September 08, 2018, 02:40:03 PM »
I'm confused with that-- nitrous controller sends signal to relay to ground 21--0 that should be to activate the MS for nitrous map, correct??
Official Site Tuner

Home of one of the fastest 750cc bikes in the world
239MPH faired, 217MPH naked!
Bonneville 200 Club
El Mirage 200 Club
Mojave Mile 200 Club
Mojave Magnum 200 Club
NEDRA 100 MPH Club
Gairdner 200MPH Achiever 2013
2014 1st place Mojave Mile N/A bike
2015 top speed trophy at WOS
Colorado mile 200 MPH club
2017 DLRA 200 MPH club
2018 Shift Sector 200 MPH Club

Offline RansomT

  • Post Master
  • *****
  • Posts: 1219
  • Gender: Male
Re: Pin 21 question
« Reply #11 on: September 08, 2018, 06:41:41 PM »
I'm confused with that-- nitrous controller sends signal to relay to ground 21--0 that should be to activate the MS for nitrous map, correct??


After the delay time, the nitrous controller sends out a 12v signal.  I wired in a 12V relay that when it triggered would send out a ground signal.  I cut the black/brown trace wire (pin 21) and wired it to the relay. So without nitrous it runs on the MS map.  After 1.5 second delay, the controller trips the relay and the ground signal causes the ECU to switch to the TPS map.  Yes, that is typically backwards, but I was just figuring it out at the time.  I may switch it around this week so that the relay cuts the ground.



Fastest 1.5-Mile Pass - 252.222
Fastest 1-Mile Pass - 244.2997
Half Mile - 211.47
Fastest Nitrous Bike
Production Bike
211.079 LTA. P/P 1350