Haybusa Parts and Service Member Support

Author Topic: Help!! With two internal motor parts.  (Read 2726 times)

Offline Darrenmiller7704

  • New User!
  • *
  • Posts: 3
  • Enthusiast
Help!! With two internal motor parts.
« on: October 14, 2020, 03:47:24 AM »
So I’ll start with I fed up ... 🤦‍♂️ so from the beginning I spun a rod bearing on my 07 busa ,it’s a 100% stock , and I figured instead of buying another motor I would just take mine apart and assess the damage and go from there so i take it all apart the head the jug and both are good my jug has no damage so I continue and now I’m down to the main case. So I’m taking the bolts out of the top  and then I picked the motor up and flipped it over and I go to remove the bottom main case bolts inside the oil pan and  I then see these two little springs and what looks like plungers that sit inside the springs....  I have no idea where they go I tried going through some of the online service manual but I can’t seem to find them in it does anyone here know what they are and where they go I would truly appreciate any help, I attached some photos of them and I put them next to one of the small bolts just for a size comparison, I would truly appreciate all help thank you !!

Offline firemanjim

  • Post Whore
  • ****
  • Posts: 914
  • Gender: Male
    • Black Art Racing
Re: Help!! With two internal motor parts.
« Reply #1 on: November 01, 2020, 01:55:15 PM »
Those are from behind the gear position sensor.
Official Site Tuner

Home of one of the fastest 750cc bikes in the world
239MPH faired, 217MPH naked!
Bonneville 200 Club
El Mirage 200 Club
Mojave Mile 200 Club
Mojave Magnum 200 Club
NEDRA 100 MPH Club
Gairdner 200MPH Achiever 2013
2014 1st place Mojave Mile N/A bike
2015 top speed trophy at WOS
Colorado mile 200 MPH club
2017 DLRA 200 MPH club
2018 Shift Sector 200 MPH Club