GENERAL > DRAG RACING

Stack Height?

(1/2) > >>

Abusive:
I’m in the process of setting up an MTC Gen 2 Clutch, the instructions say start with a stack height of approximately 1.7105 or somewhere close. How do you achieve this? Is it ok to run two steels together within the stack?

RansomT:
I'm also trying to figure out the MTC Gen 2 thing on my Busa, keep us posted please. 

Abusive:
Well what I know so far is that the longer springs raises the rpms that you leave at. I colored all of the springs so that I can visually see which springs I have installed without measuring them. I started with two # 10 shims under the static springs and three of the second and third longest springs in the top of the hat the dynamic  springs. (springs over the arms).
I’m running a stock wheelbase so I’m still  asking adjustments.

RansomT:
Use the stock clutch without the thick steels or fibers.  No 2 steels together.

Abusive:
Thanks!

Navigation

[0] Message Index

[#] Next page